Model 1450 Single Acting Meter, Mix and Dispense System

Designed for production dispensing of two part reactive resin formulations with abrasive fillers which settle out of suspension.
 

• Wide range of bore sizes and ratios to satisfy your production requirements.
• Positive displacement piston metering for consistent, accurate delivery of A and B materials. Ratio is assured by honed cylinder diameters.
• Precision ball valves eliminate problems caused by check valves.
• Low cycle rate for improved wear.
• Stainless steel, teflon, and hard coated nickel components ensure long lasting performance, even with abrasive materials.
• Stroke adjust to preset shot size.
• Manual ("eyeball") or controlled dispensing.
• Mixer manifold isolates materials until they enter the disposable mixer.
• Inexpensive disposable mixing. No solvents.
• Material is pressure fed from tanks or pump fed from 5 gallon pails, 55 gallon drums, or other bulk containers.

OPTIONS

• Encoder - For critical applications requiring precise shot size.
• Accuracy to .0008" of cylinder stroke. (.0004" optional)
• Pumps - Wide range available for use with 5 gallon to 55 gallon containers.
• Air assisted ram for heavy or viscous liquids.
• Tanks - Vacuum degassing -- 1 Quart to 30 gallons
  -- Heated blankets to 200°F
  -- Agitation-pneumatic or electric
  -- Nitrogen blanket for moisture sensitive materials
  -- Level controls
• Heated hoses - Up to 20 feet.

ENGINEERED OPTIONS

• Systems Integration - Interfacing of EXACT dispensing equipment with your process.
• Portable skids/carts - Engineered to your application, offers mobility for remote task requirements.